Trouble in Hydraulic Unloader Valve
You are on n4net and this is indian railway track machine trouble shooting technology with you.
This is a series of trouble shooting technique for the track machine working in Indian Railway. When you study this you able to rectify a fault of machine. If this is helpful for you than share with others. It may helps them. Thanks for sharing.
Now we study about "Hydraulic Unloader Valve"2) Fault :- Fails to completely unload pump.
Probable causes and Remidial action.
1. Valve pressure setting too high.
>> Set valve at proper pressure.
2. Valve spool binding in body.
>> Clean the spool and oil in the tank.
3. Incorrect assembly.
>> Assemble as per proper drawing.
4. Nil or low nitrogen pressure in the accumulator.
>> Check pressure and recharge the accumulator ( 80 to 85 bar).
5. Punctured bladder.
>> Change the bladder.
Now we study about "Hydraulic Unloader Valve"
2) Fault :- Fails to completely unload pump.
Probable causes and Remidial action.
1. Valve pressure setting too high.
>> Set valve at proper pressure.
2. Valve spool binding in body.
>> Clean the spool and oil in the tank.
3. Incorrect assembly.
>> Assemble as per proper drawing.
4. Nil or low nitrogen pressure in the accumulator.
>> Check pressure and recharge the accumulator ( 80 to 85 bar).
5. Punctured bladder.
>> Change the bladder.
>> Set valve at proper pressure.
2. Valve spool binding in body.
>> Clean the spool and oil in the tank.
3. Incorrect assembly.
>> Assemble as per proper drawing.
4. Nil or low nitrogen pressure in the accumulator.
>> Check pressure and recharge the accumulator ( 80 to 85 bar).
5. Punctured bladder.
>> Change the bladder.
No comments:
Post a Comment