General safety rules followed by track machine staffs
You are on n4net and this is indian railway track machine trouble shooting technology with you.
This is a series of trouble shooting technique for the track machine working in Indian Railway. When you study this you able to rectify a fault of machine. If this is helpful for you than share with others. It may helps them. Thanks for sharing.
Now this is general safety rules for track machine staff and superwisers.
>>>>The machine has to be operated as per existing Indian Railways rules and regulations.This is a series of trouble shooting technique for the track machine working in Indian Railway. When you study this you able to rectify a fault of machine. If this is helpful for you than share with others. It may helps them. Thanks for sharing.
>>>> The safety of yourself and other people is a most important consideration in the operation and maintenance of the machine.
>>>> Remember, the machine is a working unit, carrying delicate instruments. Therefore the machine should not be driven at excessive speed over bad track or turnouts.
>>>> Always keep your eyes open for other men working close to the
Machine.
>>>> Do not forget to look out for signals, switches and track obstructions.
>>>> Remember to make sure that all protection equipment and safety devices are in place on the machine and in working order especially when it is being driven from site to site.
>>>> Always keep the machine clean. Excessive oil or grease on the machine can cause you to slip and fall and is also a potential fire hazard.
>>>> Always lock the machine before you leave. Make sure that the machine is protected in accordance with railways regulations.
>>>> Whenever you have the opportunity while waiting to get out on a job, do some of the smaller maintenance jobs such as tightening loose nuts and bolts and cleaning the machine.
>>>> Do not permit unauthorized persons to operate the machine.
>>>> It is prohibited to use exposed light or fire on or near the machine.
>>>> Whenever there is work in tamping unit, the units have to be locked and whenever maintenance work involves, such as tightening of cardan shaft bolts, hand brake should be applied.
>>>> Do not tow the machine if the final drive is engaged.
