Trouble in Hydraulic Pump
You are on n4net and this is indian railway track machine trouble shooting technology with you.
This is a series of trouble shooting technique for the track machine working in Indian Railway. When you study this you able to rectify a fault of machine. If this is helpful for you than share with others. It may helps them. Thanks for sharing.
Now we study about "Hydraulic Pump"7) Fault :- Hydraulic oil overheated.
Probable causes and Remidial action.
1. System pressure is too high.
=> Adjust the pressure to the required limit.
2. Dirty oil
=> Clean or change filters and strainers.
3. Oil level is low.
=> Fill up the oil to the upper mark.
4. Hydraulic oil of incorrect viscosity.
=> Check oil for proper viscosity. If, change of oil is required, flush the entire system and change filter before adding fresh oil.
5. Faulty cooling system.
=> Check oil cooler for trash on out side cooling surfaces. Clean with air pressure, or steam pressure.
6. Hydraulic oil by passing internally due to worn pump, valve, motor and cylinder.
=> Overhaul or replace faulty components.
Now we study about "Hydraulic Pump"
7) Fault :- Hydraulic oil overheated.
Probable causes and Remidial action.
=> Adjust the pressure to the required limit.
2. Dirty oil
=> Clean or change filters and strainers.
3. Oil level is low.
=> Fill up the oil to the upper mark.
4. Hydraulic oil of incorrect viscosity.
=> Check oil for proper viscosity. If, change of oil is required, flush the entire system and change filter before adding fresh oil.
5. Faulty cooling system.
=> Check oil cooler for trash on out side cooling surfaces. Clean with air pressure, or steam pressure.
6. Hydraulic oil by passing internally due to worn pump, valve, motor and cylinder.
=> Overhaul or replace faulty components.
No comments:
Post a Comment